Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use, please do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is, among other things, influenced by the wood‘s natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Transparent coloured: Apply very thinly and evenly to the clean and dry wood along the wood grain with Osmo Double Blade Scraper, Osmo Microfibre Roller or Osmo Floor Brush 150 mm, and massage into the wood with a white pad. Allow to dry for approx. 12 hours with good ventilation. Intensively coloured: If a stronger colour intensity is desired, apply very thinly and evenly to the clean and dry wood along the wood grain with Osmo Microfibre Roller or Osmo Floor Brush 150 mm, and spread well.

Tip: With an unused Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Allow for good ventilation while drying. If an even more intense colouration is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Osmo Floor Brush 150 mm, and massage into the wood with a white pad. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx®-Oil.

A high quality German-made double sided trowel for the easy and efficient application of viscous wood finishes. Used in large “figure 8” sweeping motions, the trowel has two sides, flexible (for initial spreading) and firm (for removing product excess). No sharp edges or burrs; the trowel can be disassembled completely with a screwdriver and stainless steel portions can be thoroughly cleaned with Osmo Brush Cleaner and Thinner 8000.

Osmo FloorXcenter is a lightweight and easy to manage floor buffing unit which has a soap dispenser that enables the user to dispense the optimal amount of a pre-loaded cleaner, such as a mixture of Osmo Intensive Cleaner, or Osmo Wash and Care for easy floor maintenance. Can be used to clean, resurface as well as colour and refinish floors with Osmo wood finishes.

A high quality German-made 500mm trowel for the easy and efficient application of viscous wood finishes over large areas of flooring. Telescopic handle and frame saves kneeling and allows the user to cover large areas quickly. No sharp edges or burrs; the trowel is cleaned with a cloth and then wiped down with Osmo Brush Cleaner and Thinner 8000.

Microfibre Roller and Natural Bristle Brush set for the application of Osmo Finishes.